IBR 3 Pin TGV Flex Fuel Kit 02-06 WRX/STI IBR 3 Pin TGV Flex Fuel Kit 02-06 WRX/STI I Build Race Cars   08+ ADAPTED KIT TO FIT OLDER 3 PIN TGVS (WILL REQUIRE BRACKET AND HOSE MODIFICATIONS) Want flex fuel on your GD Chassis tuned on Carberry or Open source, Here is your Plug and Play solution only available at Not Bad Motorsport!  This kit is designed to provide a way to data log and monitor the ethanol content of fuel on most new Subaru Vehicles. Our proprietary controller reduces complications by generating its own on board 12V supply to power the sensor. This reduces wiring, installation time and improves reliability. Our system also properly references the ECU 5V power to provide the most consistent and accurate data.  The kit also comes with a custom wiring harness that can be detached from the controller to make any troubleshooting and repairs simple and painless. Compatibility:3 Pin TGV Subarus (GD Chassis/FXT/LGT) Works with all fuel management systems but the car must be tuned specifically to run flex fuel. This kit has the same voltage output of other popular kits. Retuning your car most likely will not be required if you are just replacing another brand of flex fuel controller. Key Benefits: Replaceable wiring harness that will be sold separately Automotive grade wiring No need for 12v supply from rear O2 sensor (common failure point) Installation can be done from the top with no need to crawl under the car Properly referenced analog output from ECU 5V for better accuracy Potted housing with solid pin connector for the ultimate in durability Included in the kit: Continental Flex Fuel SensorFlex Fuel Sensor BracketFlex Fuel Sensor ControllerWiring HarnessFuel Lines + Fuel Line Disconnect 

IBR 3 Pin TGV Flex Fuel Kit 02-06 WRX/STI

Sale
$595.00 $549.99
In Stock

 


08+ ADAPTED KIT TO FIT OLDER 3 PIN TGVS (WILL REQUIRE BRACKET AND HOSE MODIFICATIONS)

Want flex fuel on your GD Chassis tuned on Carberry or Open source, Here is your Plug and Play solution only available at Not Bad Motorsport! 

This kit is designed to provide a way to data log and monitor the ethanol content of fuel on most new Subaru Vehicles. Our proprietary controller reduces complications by generating its own on board 12V supply to power the sensor. This reduces wiring, installation time and improves reliability. Our system also properly references the ECU 5V power to provide the most consistent and accurate data.  The kit also comes with a custom wiring harness that can be detached from the controller to make any troubleshooting and repairs simple and painless.

Compatibility:
3 Pin TGV Subarus (GD Chassis/FXT/LGT)

Works with all fuel management systems but the car must be tuned specifically to run flex fuel. This kit has the same voltage output of other popular kits. Retuning your car most likely will not be required if you are just replacing another brand of flex fuel controller.

Key Benefits:

  • Replaceable wiring harness that will be sold separately

  • Automotive grade wiring

  • No need for 12v supply from rear O2 sensor (common failure point)

  • Installation can be done from the top with no need to crawl under the car

  • Properly referenced analog output from ECU 5V for better accuracy

  • Potted housing with solid pin connector for the ultimate in durability

Included in the kit:

Continental Flex Fuel Sensor
Flex Fuel Sensor Bracket
Flex Fuel Sensor Controller
Wiring Harness
Fuel Lines + Fuel Line Disconnect 

 


08+ ADAPTED KIT TO FIT OLDER 3 PIN TGVS (WILL REQUIRE BRACKET AND HOSE MODIFICATIONS)

Want flex fuel on your GD Chassis tuned on Carberry or Open source, Here is your Plug and Play solution only available at Not Bad Motorsport! 

This kit is designed to provide a way to data log and monitor the ethanol content of fuel on most new Subaru Vehicles. Our proprietary controller reduces complications by generating its own on board 12V supply to power the sensor. This reduces wiring, installation time and improves reliability. Our system also properly references the ECU 5V power to provide the most consistent and accurate data.  The kit also comes with a custom wiring harness that can be detached from the controller to make any troubleshooting and repairs simple and painless.

Compatibility:
3 Pin TGV Subarus (GD Chassis/FXT/LGT)

Works with all fuel management systems but the car must be tuned specifically to run flex fuel. This kit has the same voltage output of other popular kits. Retuning your car most likely will not be required if you are just replacing another brand of flex fuel controller.

Key Benefits:

  • Replaceable wiring harness that will be sold separately

  • Automotive grade wiring

  • No need for 12v supply from rear O2 sensor (common failure point)

  • Installation can be done from the top with no need to crawl under the car

  • Properly referenced analog output from ECU 5V for better accuracy

  • Potted housing with solid pin connector for the ultimate in durability

Included in the kit:

Continental Flex Fuel Sensor
Flex Fuel Sensor Bracket
Flex Fuel Sensor Controller
Wiring Harness
Fuel Lines + Fuel Line Disconnect